Company claims thermoplastic CFRP holds several advantages over thermoset CFRP, including 100 percent recyclability.
While the use of carbon-fiber reinforced plastic (CFRP) has become a mainstay in aircraft production, many are unaware there is more than one type available. Airbus, Toulouse, France, is working to take maximum benefit of thermoplastic CFRP material—which holds several key advantages over the thermoset-type CFRP that is more commonly used across the air transport sector, including 100 percent recyclability.
CleanBayArea continues reposting interesting articles about hi-tech, startups and new technologies to draw attention to e-waste recycling of used computer, lab, test, data center, R&D, computer and electronic equipment. Please stop disposing them into a dumpster. Recycle used electronics with CleanBayArea.
CFRP materials—both thermoplastic and thermoset—are created when thousands of carbon filament threads are bundled together before being combined with a matrix to form a composite material. A ply or layer is made to the specified size and orientation, and then more layers are added until the piece has the necessary properties to support the loads it will carry. The resulting material is composed of approximately 60 percent fibers and 40 percent resin, Airbus says.
Read how to recycle e-waste in San Jose, Santa Clara, Cupertino & San Francisco
Jean-Florent Lamèthe, an engineer from Airbus’ Materials and Processes team, explains that thermoplastic CFRP has excellent fatigue and damage tolerance properties, along with shorter manufacturing cycles and lower moisture absorption. It can even be welded, though thermoset CFRP cannot.
The key difference between thermoplastic and thermoset CFRP, according to Lamèthe, is what happens during their individual curing processes. "When you put 'raw' thermoset material into an autoclave and 'cook' it, there's a chemical reaction—the actual chemical composition of the material changes,” he says. “With thermoplastic composites, you can melt a finished piece and reshape it and it still has the same chemical composition."
Gael Sarrieu, also of the company’s Materials and Processes team, adds, "This difference makes thermoplastic composites very attractive. Why? Because Airbus and its suppliers produce literally hundreds of tonnes of scrap thermoplastic composites each year."
He continues, “With thermoset, you would need to burn the resin, and all you end up with are the fibers—the remaining 40 percent (the resin) is lost. But with thermoplastic composites, the scrap produces the same amount of recycled material, which could be used in a variety of structural and interior applications.”
Unlike thermoset CFRP, thermoplastic composites also do not require curing in an autoclave and can be stored at ambient temperature without need of a freezer and humidity- and temperature-controlled room, significantly reducing energy costs, Airbus says.
Thermoset composites have become more prevalent in the air transport sector over the years because it is perceived—sometimes incorrectly, according to Sarrieu—to be less expensive.
"There are many suppliers of thermoset, so that drove down the cost. But now, there are more and more thermoplastic composites manufacturers entering the market, so prices are coming down,” Sarrieu says. “Still, even before the A350 XWB, Airbus had more than 1,500 reference parts made from thermoplastic composites and its use will continue to grow."
Author Recycling Today Staff
Permanent article address